To connect your SEAT, add it in My SEAT App with your SEAT ID, complete its registration in the car and become the primary user, then start the connection in Voltaback. The connection is immediate once you are logged in. If the app shows “Connection in progress”, allow up to 3 days.
Before you start
Your fleet manager has assigned this vehicle to you in Voltaback.
Your SEAT is compatible: Leon e-HYBRID built from May 2020, or Mii electric.
You have the chassis number (on the registration certificate, or at the bottom of the windscreen), and the car's two keys.
The My SEAT App is installed, and you have a SEAT ID. The SEAT CONNECT app, still mentioned on the French site, can no longer be downloaded: use My SEAT App. The SEAT CONNECT web portal is closed as well.
The SEAT CONNECT services are active. The free trial lasts at least 12 months, then a renewal is needed. Check with your fleet manager before paying.
The steps
In My SEAT App
Create your SEAT ID.
Confirm it with the link received by e-mail. Remember to check your spam.
Add the car with its chassis number.
Follow the instructions. Depending on the model, the app sends you to the car for a check with the two keys, or gives you an 8-digit registration code.
In your vehicle
Labels and menus may vary depending on the model and the software version.
Do these checks in all cases.
Complete the registration by following the on-screen instructions.
If you received an 8-digit code: open Settings > Online services > Registration, then enter it.
Become the primary user in the Users menu.
Through Service management or the screen's Control centre, leave private mode.
Choose the privacy level that shares the position.
In Voltaback
In the Voltaback app, tap “Connect my vehicle”: at the “Connect my …” step of the sign-up, or later from the home screen or the “Vehicle” tab.
On the SEAT page that opens, log in with your SEAT ID.
Confirm the requested sharing.
The status should then change to “Connected”.
If the app shows “Connection in progress” without asking you for login details
Your vehicle is connected in another way, decided with your company. You have nothing to enter.
If Voltaback shows “Car Data Permissions”, tick the requested permissions, then tap “Continue”.
Check the privacy settings in the car.
Drive.
If you get stuck
If the app shows “Driver action required”, tap “See more”: you will read the detailed message, reproduced in this table.
What you see | What it means | What to do |
You are not the primary user | The account used does not have this role in the car | Take this role in the Users menu, then tap “Connect my vehicle”. If this is impossible, contact your SEAT dealer |
The car refuses your registration code | No internet in the car, or the code has expired (it lasts one year) | Check the connection. Otherwise, delete the car from your garage, add it again and use the new code |
You take over a colleague's car | Their account may still be linked | In the car: User > Delete user/Restore original settings. This erases their data: do it with your fleet manager's agreement |
“Add your vehicle to your SEAT account” | The account holds no vehicle | Add it in the app, then tap “Connect my vehicle” |
“Log in with the SEAT account of this vehicle” | The account used holds another vehicle | Use the right account, or add this vehicle to it |
“Reconnect your SEAT account” | The link is broken, for example after a password change | Tap “Connect my vehicle”, then log in |
“The connection with SEAT failed” | The exchange with SEAT did not succeed | Try again with “Connect my vehicle”. If the failure repeats, contact support |
“Connect your vehicle with your SEAT account” | The connection without login details was refused, the vehicle is already linked elsewhere | Tap “Connect my vehicle” and log in with this vehicle's account |
“Turn on data sharing in your car” | A privacy setting blocks the sending of data | Correct the setting in the car, then tap “Retry the connection” |
“Connection in progress” that lasts | The request is waiting for the car's first data | Check the setting and drive. If no data is received at all, the request is eventually rejected, and a message is shown |
“Connection request expired” | The manufacturer received no data and closed the request | Install the updates, drive several times, then contact support: only support can restart the request |
Waiting for the connection
When you log in on the SEAT page, the connection is immediate: the status changes to “Connected”. If it shows “Driver action required”, follow the message (“See more” button).
If the app shows “Connection in progress” (the route without login details), allow up to 3 days. Once the car settings are done, you have nothing more to do.
Contacting support
Contact support if:
the message stays displayed after your checks;
your SEAT is not in the list of compatible models;
you see “Connection request expired”.
Give the model, the year, the exact message shown in Voltaback and a screenshot of the app.
Official SEAT help
SEAT Connect FAQ: compatible models, adding the vehicle, registration code, private mode, duration, unlinking.
SEAT CONNECT: presentation of the service and registration.
End of the SEAT CONNECT portal: the portal is closed. The download links on this page no longer work.
My SEAT App on Google Play: the current app and the compatible models.
My SEAT App on the App Store: the same app, for iPhone.
SEAT CONNECT FAQ: adding the vehicle depending on the model, check with the two keys.
Renew SEAT CONNECT: renewal in the car or online.
