Skip to main content

Connect a Škoda vehicle to Voltaback

Car added in MyŠkoda, primary user, online mode on, then connection in Voltaback. Immediate connection once logged in, otherwise up to 3 days.

Written by Henri Casalis

To connect your Škoda, add it in MyŠkoda with your Škoda ID account, become the primary user and turn on online mode in the car, then start the connection in Voltaback. The connection is immediate once you are logged in. If the app shows “Connection in progress”, allow up to 3 days. The guide applies to electric Škoda models (Enyaq, Elroq) and plug-in hybrids (Superb, Kodiaq).

Before you start

  • Your fleet manager has assigned this vehicle to you in Voltaback.

  • The car has been delivered to you. Until it is there, you cannot finish the connection.

  • The MyŠkoda app is installed, and you have a Škoda ID account.

  • The Škoda Connect services are active. For Škoda, the name is Škoda Connect, not We Connect.

The steps

In the MyŠkoda app

  1. Log in with your Škoda ID, or create it.

  2. Add the vehicle with its chassis number and follow the instructions.

  3. Check the duration of your Škoda Connect services. If they have expired, check with your fleet manager before paying anything.

In your vehicle

The labels and menus may vary depending on the model and the software version.

Do these checks in all cases, even if Škoda says the default setting is fine.

  1. Become the primary user with your Škoda ID.

  2. Open Menu > Users > Settings, then set online mode to on.

  3. Check the location sharing. The label depends on the screen and the year:

    • Plug-in hybrid Superb and Kodiaq: choose the level that shares the location. Careful, a neighbouring level “uses” the location without sharing it: it is not the right one.

    • Recent Enyaq and Elroq: turn on vehicle data and the sending of the location.

    • Oldest Enyaq: turn on online mode and location sharing.

In Voltaback

  1. In the Voltaback app, tap “Connect my vehicle”: at the “Connect my …” step of sign-up, or later from Home or the “Vehicle” tab.

  2. On the Škoda page that opens, log in with the account that is the primary user.

  3. Confirm the sharing requested.

The status should then change to “Connected”.

If the app shows “Connection in progress” without asking for login details

Your vehicle is connected another way, decided with your company. You have nothing to enter.

  1. If Voltaback shows “Car Data Permissions”, tick the permissions requested, then tap “Continue”.

  2. Check the location sharing in the car.

  3. Drive.

If it gets stuck

If the app shows “Driver action required”, tap “See more”: you will read the detailed message there, repeated in this table.

What you see

What it means

What to do

A message stays displayed although you have made the connection

The account used may be a guest, not the primary user

Check the primary user in the car, then reconnect with that same account. If nothing changes, contact support

“Add your vehicle to your Škoda account”

The account contains no vehicle, often because the car has not been delivered yet

Add it in MyŠkoda as soon as you have it, then tap “Connect my vehicle”

“Log in with the Škoda account of this vehicle”

The account used contains another vehicle

Use the right account, or add this vehicle to it

“Reconnect your Škoda account”

The link is broken, for example after a password change

Tap “Connect my vehicle”, then log in

“The connection with Škoda failed”

The exchange with Škoda did not succeed

Try again with “Connect my vehicle”. If the failure repeats, contact support

“Connect your vehicle with your Škoda account”

The connection without login details was refused, the vehicle is already linked elsewhere

Tap “Connect my vehicle” and log in with this vehicle's account

“Turn on data sharing in your car”

A privacy setting blocks the sending of data

Correct the setting in the car, then tap “Retry the connection”

“Connection in progress” that lasts

The request is waiting for the first data from the car

Check the setting and drive. If no data at all is received, the request ends up being rejected, and a message is displayed

“Connection request expired”

The manufacturer received no data and closed the request

Do the updates, drive several times, then contact support: only support can restart the request

The status is “Connected”, but charging sessions are misclassified or missing

The car may not have sent its location for a while

Check the location sharing, then report the charging session to support

A message announces the end of Škoda Connect

The services are expiring

Tell your fleet manager. Do not pay without their approval

You are taking over a car already used by a colleague

Their account may still be the primary user

Take the primary user role with your account. Your fleet manager updates Voltaback

Waiting for the connection

When you log in on the Škoda page, the connection is immediate: the status changes to “Connected”. If it shows “Driver action required”, follow the message (“See more” button).

If the app shows “Connection in progress” (the route without login details), allow up to 3 days. Once the car's settings are done, you have nothing more to do.

Contacting support

Contact support if:

  • the message stays displayed after your checks;

  • you see “Connection request expired”;

  • charging sessions are missing.

Give the model, the exact message shown in Voltaback, a photo of the car's Users screen and a screenshot of MyŠkoda.

Official Škoda help

Did this answer your question?