Skip to main content

Connect an Audi vehicle to Voltaback

Audi connect licence, car added to myAudi, primary user, then connection in Voltaback. Immediate once logged in, otherwise up to 3 days.

Written by Henri Casalis

To connect your Audi, activate the Audi connect licence, add the car to your myAudi account and set yourself as the primary user, then start the connection in Voltaback. The connection is immediate once you are logged in. If the app shows “Connection in progress”, allow up to 3 days. The guide applies to electric and plug-in hybrid Audi cars.

Before you start

  • Your fleet manager has assigned this vehicle to you in Voltaback.

  • The car has been delivered to you.

  • The myAudi app is installed, and your account is verified.

  • You have the chassis number (on the registration certificate, or at the bottom of the windscreen).

  • You have the key and its tag with the 10-digit vehicle code. If the tag is missing, ask your fleet manager or your lessor for it.

  • The Audi connect remote & control licence is active. It has a limited duration.

  • Activate the licence before connecting Voltaback.

The steps

In the myAudi app

Labels and menus may vary depending on the model and the software version.

  1. Log in to your account, or create it.

  2. Add the car with its chassis number.

  3. In the vehicle's user management, set yourself as the primary user. Audi asks you to verify your identity and choose a 4-digit code.

  4. Check the Audi connect licence. If it has expired, check with your fleet manager before renewing.

In your vehicle

Labels and menus may vary depending on the model and the software version.

Do these checks in all cases.

  1. On the car's screen, log in to myAudi with your login details or with the 8-digit PIN code given by myAudi. The car must have internet access.

  2. On the MMI screen, open Settings > Users > “Set primary user”.

  3. Enter your myAudi login details, then your 4-digit PIN code. Do it within 72 hours of adding the car in myAudi (deadline set by Audi).

  4. Check the privacy settings according to your model:

    • Q6 e-tron and A6 e-tron: logged in to your profile, open Settings > Privacy settings and activate mobile data. On the guest profile, the setting is not kept.

    • Other models: turn off privacy mode if it is active.

In Voltaback

  1. In the Voltaback app, tap “Connect my vehicle”: at the “Connect my …” step of the sign-up, or later from the home screen or the “Vehicle” tab.

  2. On the Audi page that opens, log in with your myAudi account.

  3. Confirm the requested sharing.

The status should then change to “Connected”.

If the app shows “Connection in progress” without asking you for login details

Your vehicle is connected in another way, decided with your company. You have nothing to enter.

  1. If Voltaback shows “Car Data Permissions”, tick the requested permissions, then tap “Continue”.

  2. Check the privacy settings in the car.

  3. Drive.

If you get stuck

If the app shows “Driver action required”, tap “See more”: you will read the detailed message, reproduced in this table.

What you see

What it means

What to do

A message asks you to subscribe to Audi connect, although you already have it

The licence was activated after the connection, or it does not cover the right service

Check the remote & control licence in myAudi, then reconnect. If the button does not appear, contact support

You are the primary user, but some functions are greyed out

The licence has expired or the vehicle has been reset

Check the licence, then redo the primary user step in the car

“Add your vehicle to your Audi account”

The account holds no vehicle

Add it in myAudi, then tap “Connect my vehicle”

“Log in with the Audi account of this vehicle”

The account used holds another vehicle

Use the right account, or add this vehicle to it

“Reconnect your Audi account”

The link is broken, for example after a password change

Tap “Connect my vehicle”, then log in

“The connection with Audi failed”

The exchange with Audi did not succeed

Try again with “Connect my vehicle”. If the failure repeats, contact support

“Connect your vehicle with your Audi account”

The connection without login details was refused, the vehicle is already linked elsewhere

Tap “Connect my vehicle” and log in with this vehicle's account

“Turn on data sharing in your car”

A privacy setting blocks the sending of data

Correct the setting in the car, then tap “Retry the connection”

“Connection in progress” that lasts

The request is waiting for the car's first data

Check the setting and drive. If no data is received at all, the request is eventually rejected, and a message is shown

“Connection request expired”

The manufacturer received no data and closed the request

Install the updates, drive several times, then contact support: only support can restart the request

You finally receive another vehicle, or you change driver

The change is made on the company side

Your fleet manager updates Voltaback. The previous driver removes the vehicle from their myAudi account if needed

Waiting for the connection

When you log in on the Audi page, the connection is immediate: the status changes to “Connected”. If it shows “Driver action required”, follow the message (“See more” button).

If the app shows “Connection in progress” (the route without login details), allow up to 3 days. Once the car settings are done, you have nothing more to do.

Contacting support

Contact support if:

  • the message stays displayed after your checks;

  • the licence was activated after the connection and you cannot reconnect;

  • you see “Connection request expired”.

Give the model, the exact message shown in Voltaback and a screenshot of myAudi showing the licence.

Official Audi help

Did this answer your question?