Skip to main content

Connect a Cupra vehicle to Voltaback

Car added in My CUPRA, online mode with location, primary user, then connection in Voltaback. Immediate once logged in, otherwise up to 3 days.

Written by Henri Casalis

To connect your Cupra, add it in My CUPRA with your CUPRA ID account, turn on online mode with location in the car and register as the primary user, then start the connection in Voltaback. The connection is immediate once you are logged in. If the app shows “Connection in progress”, allow up to 3 days. The guide applies to electric Cupra cars (Born, Tavascan) and e-HYBRID plug-in hybrids (Formentor, Leon, Terramar).

Before you start

  • Your fleet manager has assigned this vehicle to you in Voltaback.

  • The car has been delivered to you and you have its keys. On Formentor, Leon and Terramar e-HYBRID, keep both keys at hand for the registration.

  • The My CUPRA app is installed, and you have a CUPRA ID account.

  • The CUPRA CONNECT licence is valid. The announced free trial is one year on Formentor and Leon. If it has expired, check with your fleet manager.

  • The menus differ between Born and Tavascan on one side, and Formentor, Leon and Terramar e-HYBRID on the other. Follow the part that matches your car.

The steps

In the My CUPRA app

  1. Create your CUPRA ID, or log in.

  2. Add the vehicle with its chassis number and follow the instructions.

  3. If the vehicle already has a primary user, the app offers to replace them. The previous user is notified.

In your Born or Tavascan

Labels and menus may vary depending on the model and the software version.

Do these checks in all cases, even if the car seems already well set up. Start with online mode: Cupra requires it before the registration.

  1. Switch privacy mode to Online: from the home screen, the control centre (globe icon) or the menu settings.

  2. Choose the mode that includes location.

  3. Become the primary user: in the User menu, scan the QR code shown with the My CUPRA app.

In your Formentor, Leon or Terramar e-HYBRID

Labels and menus may vary depending on the model and the software version.

Also do these checks in all cases.

  1. Turn off maximum privacy.

  2. Choose the level that shares the position: User menu, then Privacy and services.

  3. Complete the registration as the primary user. The car shows a confirmation.

In Voltaback

  1. In the Voltaback app, tap “Connect my vehicle”: at the “Connect my …” step of the sign-up, or later from the home screen or the “Vehicle” tab.

  2. On the Cupra page that opens, log in with the account that is the primary user.

  3. Confirm the requested sharing.

The status should then change to “Connected”.

If the app shows “Connection in progress” without asking you for login details

Your vehicle is connected in another way, decided with your company. You have nothing to enter.

  1. If Voltaback shows “Car Data Permissions”, tick the requested permissions, then tap “Continue”.

  2. Check the position sharing in the car.

  3. Drive.

If you get stuck

If the app shows “Driver action required”, tap “See more”: you will read the detailed message, reproduced in this table.

What you see

What it means

What to do

A message asks you to turn on location sharing in the vehicle settings

The car does not send its position, even if it shows it on board

Set the privacy as described above, then reconnect if needed

You are not the primary user

The account used does not have this role in the car

Register this account as the primary user, then tap “Connect my vehicle”

You cannot change the user on a Born

On the first Born cars, only one account can be linked

A factory reset is needed, then a new registration. Talk to your fleet manager before doing it

I do not see my services in the app

The registration is not complete or maximum privacy is active

Redo the registration and turn off maximum privacy

“Error” when trying to disconnect the vehicle

Most often, the vehicle is not actually connected: there is nothing to disconnect

Restart “Connect my vehicle”

“Add your vehicle to your Cupra account”

The account holds no vehicle

Add it in My CUPRA, then tap “Connect my vehicle”

“Log in with the Cupra account of this vehicle”

The account used holds another vehicle

Use the right account, or add this vehicle to it

“Reconnect your Cupra account”

The link is broken, for example after a password change

Tap “Connect my vehicle”, then log in

“The connection with Cupra failed”

The exchange with Cupra did not succeed

Try again with “Connect my vehicle”. If the failure repeats, contact support

“Connect your vehicle with your Cupra account”

The connection without login details was refused, the vehicle is already linked elsewhere

Tap “Connect my vehicle” and log in with this vehicle's account

“Turn on data sharing in your car”

A privacy setting blocks the sending of data

Correct the setting in the car, then tap “Retry the connection”

“Connection in progress” that lasts

The request is waiting for the car's first data

Check the setting and drive. If no data is received at all, the request is eventually rejected, and a message is shown

“Connection request expired”

The manufacturer received no data and closed the request

Install the updates, drive several times, then contact support: only support can restart the request

You change vehicle or driver

The change is made on the company side

Your fleet manager updates Voltaback. The new driver takes the primary user role

Waiting for the connection

When you log in on the Cupra page, the connection is immediate: the status changes to “Connected”. If it shows “Driver action required”, follow the message (“See more” button).

If the app shows “Connection in progress” (the route without login details), allow up to 3 days. Once the car settings are done, you have nothing more to do.

Contacting support

Contact support if:

  • the message stays displayed after your checks;

  • you see “Connection request expired”;

  • the user change is impossible.

Give the model, the exact message shown in Voltaback, a photo of the car's User screen and a screenshot of My CUPRA.

Official Cupra help

Did this answer your question?