Skip to main content

Connect a Polestar vehicle to Voltaback

Start the connection in Voltaback, check that Polestar Connect is turned on in the car, then drive. Up to 3 days.

Written by Henri Casalis

To connect your Polestar, start the connection in Voltaback, check that “Polestar Connect” is turned on in the car, then drive. Allow up to 3 days.

Before you start

  • You have received the car and you can sit inside.

  • The car is parked somewhere covered by the mobile network.

  • You know who has the car's Owner profile, or a profile with administrator rights. The data sharing setting is made from one of these profiles.

  • If the car has already had another driver, check that the Polestar Connect service is still turned on.

The steps

In Voltaback

  1. Tap “Connect my vehicle” if the button is shown.

  2. Tick the car data access permissions, then tap “Continue”.

  3. Look at what the app shows next:

    • “Connection in progress”: you have no login details to enter. Go on to the “In your vehicle” step.

    • If the app asks for your login details: follow “In the Polestar app”, then log in with your Polestar ID.

In the Polestar app

This part applies to you if the Voltaback app asks for your login details, or if you see the message “Connect your vehicle with your Polestar account”.

  1. Install the Polestar app and create your Polestar ID if you don't have one.

  2. Keep the car's identification number to hand. It is visible on the central screen, for example.

  3. Depending on your case:

    • If you are the very first user to link their app, switch to the Owner profile, with all the car's keys on board.

    • For the following users, one key is enough.

  4. In the app, choose to pair your car, then follow the instructions of the app and of the central screen.

  5. Go back to Voltaback, tap “Connect my vehicle”, then log in with the Polestar ID linked to this car.

In your vehicle

The labels and menus may vary depending on the model and the software version.

The path below is that of the Polestar 2. On Polestar 3, the profile settings open with the car symbol in the bottom bar, then the profile symbol.

  1. Select the Owner profile, or a profile that has administrator rights.

  2. Open the profile settings, then “Accounts”.

  3. In “Accounts”:

    • If “Polestar” appears, choose it.

    • Otherwise, tap “Add account”, choose “Polestar” and log in with your Polestar ID.

  4. Open the car's settings, then “Privacy” and “Polestar privacy settings”.

  5. Check that “Polestar Connect” is turned on.

  6. Drive. Data sharing only starts once the car has been driven.

You can also turn on this sharing from the Polestar app, if it is linked to the Owner profile or to an administrator profile: choose “Data sharing”, then “Turn on”, and drive.

If it gets stuck

If the app shows “Driver action required”, tap “See more”: you will read the detailed message there, repeated in this table.

What you see

What it means

What to do

“Connection in progress”

The request has gone out, the connection is not finished

Check “Polestar Connect” and drive. This status can last. If Polestar closes the request, the app shows “Driver action required”

“Turn on data sharing in your car”

Sharing is turned off in the car

Turn on “Polestar Connect”, then tap “Retry the connection” in Voltaback

You don't have access to the data sharing setting

You are neither on the Owner profile nor an administrator

Ask your fleet manager who holds the Owner profile or an administrator profile, then make the setting from that profile

The app asks for all the keys and you only have one

You are the first to pair the car

Ask your fleet manager for the second key. If a key is lost, you have to go through a workshop

“Connect your vehicle with your Polestar account”

The car must go through your Polestar account

Tap “Connect my vehicle”, then log in with the account the car is linked to

“Add your vehicle to your Polestar account”

No car is linked to this account

Pair the car in the Polestar app, then tap “Connect my vehicle”

“Log in with the Polestar account of this vehicle”

This account is linked to another car

Use the right account, or add this car to it

“Reconnect your Polestar account”

The connection to your account must be redone, for example after a password change

Log in again with your Polestar ID

“The connection with Polestar failed”

The connection did not succeed

Try once more. If it fails again, contact support

“Connection request expired”

The request did not succeed in time

Do the car's updates and drive, then contact support. Only support can restart the request

If you are taking over another driver's car

Data sharing remains set from the Owner or administrator profile. Check this setting, then tell your fleet manager so that they assign the car to you in Voltaback.

Waiting for the connection

Allow up to 3 days after starting the connection. During this time, the app shows “Connection in progress”. Once the car's setting is done, you have nothing more to do. If it shows “Driver action required”, follow the message (“See more” button).

Contacting support

Contact support if:

  • you see “Connection request expired”;

  • “The connection with Polestar failed” comes back after a new attempt;

  • the setting is on and you have driven, without the status changing.

Give the car's model, the exact message shown in Voltaback, the date of your last trip, and say whether “Polestar Connect” is indeed turned on.

Official Polestar help

Did this answer your question?