Labels and menus may vary depending on the model and the software version.
This guide is for drivers of an electric or plug-in hybrid Alfa Romeo, including a company car. Most of the time, you do not need to enter any login details: you start the connection in Voltaback, your car must be up to date, then you drive.
Before you start
Your fleet manager has assigned this car to you in Voltaback. If the app still shows your previous car, ask them to make the change: you cannot do it yourself.
You have the car and you are going to drive it. It has to be driven to send its data.
The car shares its data and its position (see “In your vehicle”).
The car's updates are installed, or you can install them (see “In your vehicle”).
A My Alfa Connect account is only useful if Voltaback asks you for your login details. Otherwise, you do not need one for the connection.
The steps
In Voltaback
Open Voltaback and tap “Connect my vehicle”.
If the app shows the “Car Data Permissions” screen, tick the boxes, then tap “Continue”.
Look at what the app shows next:
“Connection in progress”: the request has gone to Alfa Romeo. You have nothing to enter. Go to “In your vehicle”.
The app asks for your login details: follow “In the My Alfa Connect app”, then come back here and log in with the account the car is linked to.
You will receive a notification as soon as the car is connected. The status then changes to “Connected”.
In the My Alfa Connect app
Only do this if Voltaback asks you for your login details.
Install My Alfa Connect and create your account, or log in.
Check that your car appears in the account. If not, add it.
In your vehicle
1. Check data sharing. Check in the screen settings that the car shares its data and its position.
2. Install the updates. Some are essential for the car to send its data.
Accept any update offered on the screen.
Also check in the screen settings.
If Voltaback shows “Finish connecting your car”, the app also offers you an update guide.
3. Drive. Drive at least 2 times 20 minutes since the connection request, preferably where the network is good.
If you get stuck
What you see | What it means | What to do |
“Connection in progress” | The request is with Alfa Romeo. This is not an error. If the wait goes on, the app changes to “Driver action required” and asks you to finish the connection | Check data sharing and the updates, then drive at least 2 times 20 minutes |
The My Alfa Connect app works, but Voltaback stays on “Connection in progress” | That is possible: Voltaback does not go through your app | Same checks as above |
“Driver action required” | A message is waiting for you in the app | Tap “See more”, read the title of the message, then follow the matching line of this table |
“Connection problem” | The request failed on the manufacturer's side. No button lets you retry it | Contact support and give them this message |
“Finish connecting your car” | The connection still needs an action from you | Install the updates, then drive at least 2 times 20 minutes. The message closes by itself once the car is connected |
“Connection request expired” | Alfa Romeo received no data from the car for 10 days and closed the request | Do the updates, drive at least 2 times 20 minutes, then contact support. You cannot retry on your own: it is support who restarts the request |
“Turn on data sharing in your car” | A setting in the car blocks the sending of data | Turn off privacy mode or offline mode if it is on, check that connected services are activated, then tap “Retry the connection” |
“Connect your vehicle with your Alfa Romeo account” | This car cannot connect without your login details | Tap “Connect my vehicle” and log in with the My Alfa Connect account the car is linked to |
“Add your vehicle to your Alfa Romeo account” | Your account contains no car | Add it in the My Alfa Connect app, then “Connect my vehicle” |
“Log in with the Alfa Romeo account of this vehicle” | The account used does not contain this car | Use the right account, or add the car to it in the My Alfa Connect app |
“The connection with Alfa Romeo failed” | The exchange with Alfa Romeo did not go through | Try again with “Connect my vehicle”. If it happens again, contact support |
“Reconnect your Alfa Romeo account” | Voltaback no longer receives the data, for example after a password change | Tap “Connect my vehicle” and log in again |
No update shown | The car may not have received the update yet | Drive where the network is good and accept what is shown. Still nothing: contact support with a photo of the screen |
Car connected, but a charging session is missing or its times are wrong | The car did not send any data during that period | Report the charging session in Voltaback, or write to support with the date and time |
You changed car | Voltaback still knows the old one | Ask your fleet manager to update your vehicle, then connect the new one |
Start the connection as soon as you have the car: charging sessions done before it is connected are not reimbursed, because Voltaback does not see them.
How long it takes
Allow up to 5 days once the connection has been started. If Alfa Romeo receives no data from the car for 10 days, the request expires: see “Connection request expired” above.
When to contact support
Contact support in these cases:
the app shows “Connection request expired”;
data sharing is on, the updates are done, you have driven at least 2 times 20 minutes, and the car is still not connected;
no update appears, or your screen does not match this guide;
you are not going to drive for a while (car not yet delivered, holidays, car parked): without data, the request ends up being closed;
a charging session is missing while the car is connected.
Give this information: your model, the date of your last drive longer than 20 minutes, the message shown in Voltaback, and a photo of the car's updates screen.
Official sources
Your connected services (Alfa Romeo): My Alfa Connect app and Connect packs
