Skip to main content

Connect a Peugeot vehicle to Voltaback

Most of the time, no login needed: private mode off, updates, then two 20-minute drives. Connected within 5 days at most.

Written by Henri Casalis

Labels and menus may vary depending on the model and the software version.

This guide is for drivers of an electric or plug-in hybrid Peugeot, including a company car. Most of the time, you do not need to enter any login details: you start the connection in Voltaback, your car must be up to date, then you drive.

Before you start

  • Your fleet manager has assigned this car to you in Voltaback. If the app still shows your previous car, ask them to make the change: you cannot do it yourself.

  • You have the car and you are going to drive it. It has to be driven to send its data.

  • The car's private mode is off (see “In your vehicle”).

  • The car's updates are installed, or you can install them (see “In your vehicle”).

  • A MyPeugeot account is only useful if Voltaback asks you for your login details. Otherwise, you do not need one for the connection.

The steps

In Voltaback

  1. Open Voltaback and tap “Connect my vehicle”.

  2. If the app shows the “Car Data Permissions” screen, tick the boxes, then tap “Continue”.

  3. Look at what the app shows next:

    • “Connection in progress”: the request has gone to Peugeot. You have nothing to enter. Go to “In your vehicle”.

    • The app asks for your login details: follow “In the MyPeugeot app”, then come back here and log in with the account the car is linked to.

  4. You will receive a notification as soon as the car is connected. The status then changes to “Connected”.

In the MyPeugeot app

Only do this if Voltaback asks you for your login details.

  1. Install MyPeugeot and create your account, or log in to your existing account.

  2. Check that your car appears in the account. If not, add it.

  3. If the app offers to associate the car, follow its steps. Plan for:

    • your phone, to receive a code by SMS and choose a PIN code;

    • Bluetooth turned on on the phone, or the camera to scan the QR code shown on the car's screen, depending on the model;

    • a key of the car, with the ignition on;

    • private mode off.

  4. If the car was transferred to you and another account is already associated with it: redoing the association with your account replaces the previous one.

In your vehicle

1. Turn off private mode. While it is on, the car does not share its data or its position. The steps depend on your screen:

Your screen

What to do

Dots in the middle of the top bar, or a small house and the temperature at the top left

Tap the top bar, then “Privacy”, then “Share data and location”

A messages icon on the left side

Messages icon, then “Private Mode”, then “Sharing data and vehicle position”, then OK

A messages icon in the top bar

Messages icon, then “Private Mode”, then “Sharing data and vehicle position”, then OK. Other path: Menu, “Settings”, “Map”, “Authorize sending information”, OK

An on/off icon, or no touchscreen but a smartphone holder

With the button on the left of the steering wheel, navigate the dashboard screen: “User Settings”, “Privacy”, “Share Data and Location”

You have a Boxer: the procedure is different, see the Peugeot page listed in the sources.

2. Install the updates. Some are essential for the car to send its data.

If the top bar of your screen allows updates over the connection:

  1. Park somewhere covered by the network, or on Wi-Fi. Unplug the charging cable.

  2. With the engine off, switch the ignition on.

  3. Check that a profile is selected on the screen.

  4. Open the screen's settings, then “Updates”. If nothing shows, wait 5 minutes: if there is still no result, no update is available for now.

  5. Tap the pending update to download it.

  6. When the download finishes, a message invites you to install. It disappears quickly. If you miss it, switch the ignition off and on again.

  7. Confirm the installation. The screen announces the estimated duration, around 15 minutes. During this time, the car cannot be driven, and the installation can neither be paused nor cancelled.

  8. Wait for the message saying the installation succeeded. Then let the car fall fully asleep, then switch the ignition on again or take a short drive.

An update can also appear by itself when you switch off the engine, before you open the door: accept it, Peugeot needs it for the car to send its data. Maps update while driving, but the software installs while the car is stationary.

If your screen does not look like these steps, check MyPeugeot first: a notification on the vehicle icon signals an update and details the steps. Some vehicles go through a USB key prepared with the Peugeot Update tool.

If Voltaback shows “Finish connecting your car”, the app also offers you an update guide.

3. Drive. Drive at least 2 times 20 minutes since the connection request, preferably where the network is good.

If you get stuck

What you see

What it means

What to do

“Connection in progress”

The request is with Peugeot. This is not an error. If the wait goes on, the app changes to “Driver action required” and asks you to finish the connection

Check private mode and the updates, then drive at least 2 times 20 minutes

MyPeugeot works, but Voltaback stays on “Connection in progress”

That is possible: Voltaback does not go through your MyPeugeot app. Reinstalling the app changes nothing

Same checks as above

“Driver action required”

A message is waiting for you in the app

Tap “See more”, read the title of the message, then follow the matching line of this table

“Connection problem”

The request failed on the manufacturer's side. No button lets you retry it

Contact support and give them this message

“Finish connecting your car”

The connection still needs an action from you

Install the updates, then drive at least 2 times 20 minutes. The message closes by itself once the car is connected

“Connection request expired”

Peugeot received no data from the car for 10 days and closed the request

Do the updates, drive at least 2 times 20 minutes, then contact support. You cannot retry on your own: it is support who restarts the request

“Turn on data sharing in your car”

A setting in the car blocks the sending of data

Turn off private mode, check that connected services are activated, then tap “Retry the connection”

“Connect your vehicle with your Peugeot account”

This car cannot connect without your login details

Tap “Connect my vehicle” and log in with the MyPeugeot account the car is linked to

“Add your vehicle to your Peugeot account”

Your account contains no car

Add it in MyPeugeot, then “Connect my vehicle”

“Log in with the Peugeot account of this vehicle”

The account used does not contain this car

Use the right account, or add the car to it in MyPeugeot

“The connection with Peugeot failed”

The exchange with Peugeot did not go through

Try again with “Connect my vehicle”. If it happens again, contact support

“Reconnect your Peugeot account”

Voltaback no longer receives the data, for example after a password change

Tap “Connect my vehicle” and log in again

No update shown

The car may not have received the update yet, or the profile is not selected

Check the profile, look under “Settings” > “Updates”, drive where the network is good, and accept what is shown. Still nothing: contact support with a photo of the screen

Your screen does not look like the guide, or you have no touchscreen

Screens vary by car. Some go through a USB key

Look in MyPeugeot and on the Peugeot Update page. If that does not solve it, contact support with a photo of your dashboard

Support asks you to go to a dealership

Peugeot suspects a problem with the car's connectivity box or screen, to be diagnosed on site

Book an appointment and give the workshop the references provided by support. Then tell support the result

Car connected, but a charging session is missing or its times are wrong

The car did not send any data during that period

Report the charging session in Voltaback, or write to support with the date and time

You changed car

Voltaback still knows the old one

Ask your fleet manager to update your vehicle, then connect the new one

Start the connection as soon as you have the car: charging sessions done before it is connected are not reimbursed, because Voltaback does not see them.

How long it takes

Allow up to 5 days once the connection has been started. If Peugeot receives no data from the car for 10 days, the request expires: see “Connection request expired” above.

When to contact support

Contact support in these cases:

  • the app shows “Connection request expired”;

  • private mode is off, the updates are done, you have driven at least 2 times 20 minutes, and the car is still not connected;

  • no update appears, or your screen does not match this guide;

  • you are not going to drive for a while (car not yet delivered, holidays, car parked): without data, the request ends up being closed;

  • a charging session is missing while the car is connected.

Give this information: your model, the date of your last drive longer than 20 minutes, the message shown in Voltaback, and a photo of the car's “Updates” screen.

Official sources

Did this answer your question?