Skip to main content

Connect an Opel vehicle to Voltaback

Most of the time, no login needed: data sharing, updates, then two 20-minute drives. Connected within 5 days at most.

Written by Henri Casalis

Labels and menus may vary depending on the model and the software version.

This guide is for drivers of an electric or plug-in hybrid Opel, including a company car. Most of the time, you do not need to enter any login details: you start the connection in Voltaback, your car must be up to date, then you drive.

Before you start

  • Your fleet manager has assigned this car to you in Voltaback. If the app still shows your previous car, ask them to make the change: you cannot do it yourself.

  • You have the car and you are going to drive it. It has to be driven to send its data.

  • The car shares its data and its position (see “In your vehicle”).

  • The car's updates are installed, or you can install them (see “In your vehicle”).

  • A MyOpel account is only useful if Voltaback asks you for your login details. Otherwise, you do not need one for the connection.

The steps

In Voltaback

  1. Open Voltaback and tap “Connect my vehicle”.

  2. If the app shows the “Car Data Permissions” screen, tick the boxes, then tap “Continue”.

  3. Look at what the app shows next:

    • “Connection in progress”: the request has gone to Opel. You have nothing to enter. Go to “In your vehicle”.

    • The app asks for your login details: follow “In the MyOpel app”, then come back here and log in with the account the car is linked to.

  4. You will receive a notification as soon as the car is connected. The status then changes to “Connected”.

In the MyOpel app

Only do this if Voltaback asks you for your login details.

  1. Install MyOpel and create your account, or log in to your existing account. For a new car, you may have received an e-mail from Opel to do so.

  2. Check that your car appears in the account. If not, add it: the app asks for its VIN (on the windscreen or the registration certificate) and its mileage.

  3. If the app offers to associate the car, follow its steps from the car, with the engine running. Depending on the model, the association goes through a QR code shown on the screen, through Bluetooth or by entering the mileage. Plan for your phone, to receive a code by SMS and create a 4-digit security code.

  4. Engine running for about ten minutes, then ignition off and doors closed: wait another 5 minutes.

In your vehicle

1. Check data sharing. In the screen settings, check that the car shares its data and its position. Without this sharing, connected services do not work. The steps depend on your screen:

Your screen

What to do

Dots in the middle of the top bar, or a small house and the temperature at the top left

Tap the top bar, then “Privacy”, then “Share data and location”

A messages icon on the left side

Messages icon, then “Private Mode”, then “Sharing data and vehicle position”, then OK

A messages icon in the top bar

Messages icon, then “Private Mode”, then “Sharing data and vehicle position”, then OK. Other path: Menu, “Settings”, “Map”, “Authorize sending information”, OK

An on/off icon, or no touchscreen but a smartphone holder

With the button on the left of the steering wheel, navigate the dashboard screen: “User Settings”, “Privacy”, “Share Data and Location”

You have a Movano: the procedure is different, see the Opel page listed in the sources.

2. Install the updates. Some are essential for the car to send its data.

  • A window or a notification may appear on the car's screen. Accept it.

  • You can also look in the screen settings. Check that a profile is selected.

  • Before starting the installation: engine off, ignition on, charging cable unplugged, car on the network or on Wi-Fi. During the installation, the car cannot be driven.

If Voltaback shows “Finish connecting your car”, the app also offers you an update guide.

3. Drive. Drive at least 2 times 20 minutes since the connection request, preferably where the network is good.

If you get stuck

What you see

What it means

What to do

“Connection in progress”

The request is with Opel. This is not an error. If the wait goes on, the app changes to “Driver action required” and asks you to finish the connection

Check data sharing and the updates, then drive at least 2 times 20 minutes

The MyOpel app works, but Voltaback stays on “Connection in progress”

That is possible: Voltaback does not go through your app

Same checks as above

“Driver action required”

A message is waiting for you in the app

Tap “See more”, read the title of the message, then follow the matching line of this table

“Connection problem”

The request failed on the manufacturer's side. No button lets you retry it

Contact support and give them this message

“Finish connecting your car”

The connection still needs an action from you

Install the updates, then drive at least 2 times 20 minutes. The message closes by itself once the car is connected

“Connection request expired”

Opel received no data from the car for 10 days and closed the request

Do the updates, drive at least 2 times 20 minutes, then contact support. You cannot retry on your own: it is support who restarts the request

“Turn on data sharing in your car”

A setting in the car blocks the sending of data

Turn off privacy mode or offline mode if it is on, check that connected services are activated, then tap “Retry the connection”

“Connect your vehicle with your Opel account”

This car cannot connect without your login details

Tap “Connect my vehicle” and log in with the MyOpel account the car is linked to

“Add your vehicle to your Opel account”

Your account contains no car

Add it in the MyOpel app, then “Connect my vehicle”

“Log in with the Opel account of this vehicle”

The account used does not contain this car

Use the right account, or add the car to it in the MyOpel app

“The connection with Opel failed”

The exchange with Opel did not go through

Try again with “Connect my vehicle”. If it happens again, contact support

“Reconnect your Opel account”

Voltaback no longer receives the data, for example after a password change

Tap “Connect my vehicle” and log in again

No update shown

The car may not have received the update yet

Look in the screen settings, drive where the network is good, and accept what is shown. Still nothing: contact support with a photo of the screen

Car connected, but a charging session is missing or its times are wrong

The car did not send any data during that period

Report the charging session in Voltaback, or write to support with the date and time

You changed car

Voltaback still knows the old one

Ask your fleet manager to update your vehicle, then connect the new one

Start the connection as soon as you have the car: charging sessions done before it is connected are not reimbursed, because Voltaback does not see them.

How long it takes

Allow up to 5 days once the connection has been started. If Opel receives no data from the car for 10 days, the request expires: see “Connection request expired” above.

When to contact support

Contact support in these cases:

  • the app shows “Connection request expired”;

  • data sharing is on, the updates are done, you have driven at least 2 times 20 minutes, and the car is still not connected;

  • no update appears, or your screen does not match this guide;

  • you are not going to drive for a while (car not yet delivered, holidays, car parked): without data, the request ends up being closed;

  • a charging session is missing while the car is connected.

Give this information: your model, the date of your last drive longer than 20 minutes, the message shown in Voltaback, and a photo of the car's updates screen.

Official sources

Did this answer your question?