To connect your BMW, start the connection in Voltaback and follow what the app shows: depending on the car, you have nothing to enter, or you log in with your BMW account. Then check that the car shares its data, and drive. Allow up to 3 days.
This guide applies to electric and plug-in hybrid BMW cars, company cars included.
Before you start
Your fleet manager has assigned the car to you in Voltaback. If not, the app shows “No vehicle is assigned to your account.”: you cannot add it yourself.
You have access to the vehicle and its key.
The My BMW app is installed and you have a BMW ID (the app account).
Your BMW appears in My BMW. If not, add it: see “In the My BMW app”.
Company car or long-term lease: check who the primary user is. It is the first BMW ID that added the car. If it is the previous driver, see “If you get stuck”.
The vehicle has mobile network coverage. Avoid underground car parks for these settings.
The steps
In Voltaback
Open Voltaback and tap “Connect my vehicle” if the button is shown.
Look at what the app shows next:
It asks you to grant permission to access the vehicle data: follow “If the app asks for permission to access the data”.
It asks for your login details, or shows “Connect your vehicle with your BMW account”: follow “If the app asks for your BMW account”.
If the app asks for permission to access the data
Tick the requested data, then tap “Continue”. You have no login details to enter: Voltaback sends the request to BMW and the status changes to “Connection in progress”.
Check the data settings in the “In your vehicle” section, then use the car normally.
If the app asks for your BMW account
Tap “Connect my vehicle”.
On the BMW page, log in with the account the car is linked to.
If a screen asks for an address, enter your home address, not your work address. With this connection method, Voltaback receives the data when the car is near this address.
Confirm the data sharing.
In the My BMW app
To add the car to your BMW ID:
Open the “Vehicle” tab.
Tap “Garage” (the vehicle icon, top right).
Tap “Add”, then follow the instructions.
Go to the car to read the security code, received in a “BMW message”.
Enter this code in My BMW within 3 hours.
On BMW cars with Operating System 8, 8.5 or 9, it is simpler: log in to the car with your BMW ID, and it is added to My BMW automatically.
Check in My BMW that the data is being sent
In the “Vehicle” tab, open “Vehicle configuration” (also called “Vehicle settings” or “Vehicle control centre”).
Open “Privacy settings”.
Check that sharing is not turned off.
Also check that Remote Services are activated for your vehicle.
In your vehicle
Labels and menus may vary depending on the model and the software version.
The path depends on the version of the car's system.
On Operating System 8:
Open MENU, then All apps.
Go to System settings, then Privacy.
Choose a level that allows services, for example “Allow all services”. Avoid “No services”.
On Operating System 7 and 9: BMW refers to the “Data protection” menu.
If you get stuck
If the app shows “Driver action required”, tap “See more”: you will read the detailed message, reproduced in this table.
What you see | What it means | What to do |
“Connection in progress” | The request has been sent and the car has not yet transmitted any data. This status can last. If BMW closes the request, the app shows “Driver action required” | Check the data settings and use the car. Allow up to 3 days (see “Waiting for the connection”) |
“Connect your vehicle with your BMW account” | The car already shares its data with another service, for example your employer's or your lessor's | Tap “Connect my vehicle” and log in with your BMW account |
“Add your vehicle to your BMW account” | The car is not in your BMW ID | Add it in My BMW, then tap “Connect my vehicle” |
“Log in with the BMW account of this vehicle” | You are logged in with an account that does not hold this car | Use the right account, or add the car to it |
“Reconnect your BMW account” | The link with your account was broken, for example after a password change | Tap “Connect my vehicle” and log in again |
“The connection with BMW failed” | The attempt did not succeed | Try once more. If it fails again, contact support |
“Connection request expired” | The request did not succeed and you cannot restart it yourself | Install the car's updates and drive, then contact support. Only support can restart the request |
A BMW screen asks for the registration plate and the connection stops there | The BMW account is incomplete | Enter the plate in My BMW. Close and reopen the app, then restart the connection from Voltaback |
You are not the primary user | The car stays linked to the first BMW ID that added it, often the previous driver | On Operating System 8 or newer, only the primary user can designate a co-user as the new primary user: BMW ID (profile, top right), then “Change BMW IDs” and “Manage BMW IDs”. Otherwise, see the next row |
The previous driver no longer replies or has returned the car | Their BMW ID is still registered | Talk to your fleet manager before doing anything. The reset deletes all users and settings: Apps menu, “Vehicle”, “System settings”, “Reset vehicle data”, then “Reset”. Key inside the cabin, drive-ready state switched off |
A charge does not show up | Your BMW sends its data after each lock and during charging, provided it has network coverage. If you are connected through your BMW account, the data arrives when the car is near the address entered | In My BMW, check the time of the last update under the vehicle image. Also check the home address and the data settings. If the problem continues, contact support |
Waiting for the connection
Allow up to 3 days after you start the connection. During this time, the app shows “Connection in progress”. Once the car settings are done, you have nothing more to do. If the app shows “Driver action required”, follow the message (“See more” button).
Contacting support
Contact support if:
the app shows “Connection request expired”;
the connection still fails after a new attempt;
you cannot take control of the car because another account is linked to it.
Give the make and model, the exact message shown in Voltaback and a screenshot of the My BMW screen that shows your vehicle. Never share your BMW password, with anyone.
Official BMW help
Add my BMW to my BMW ID: the path in My BMW, the security code to enter within 3 hours, the automatic addition on OS 8, 8.5 and 9.
Manage users in My BMW: the primary user and the co-users.
Change the primary user, OS 8 or newer: the path in the car.
Delete all users of the car: the reset and its conditions.
Remove a vehicle from My BMW: to do when you return the car.
Privacy settings, OS 8: the “Privacy” menu and the sharing levels.
My BMW does not update the vehicle status: when the car sends its data, the network, Remote Services.
BMW video: adding a vehicle and BMW video: Data Privacy: videos in English, cited by the BMW FAQs.
