Skip to main content

How can I improve the accuracy of the detection of my home charges?

The right habits for your first charges to calibrate detection properly, and the measurement gap to expect.

Written by Henri Casalis

The detection of your home charges relies on cross-checking the data from your vehicle with that from your Linky meter. A few habits, especially at the start, noticeably improve its accuracy.

1. Take care over your first charges

Your first charges are used to calibrate your home charging location. This is the most decisive step.

For calibration under the best conditions:

  • do two long charges at night, which isolates the noise generated by the Linky during the day;

  • let the battery's state of charge go from 20% or less to more than 80%.

Then check that these first charges do appear as made at home in your space. If they don't, report it straight away: a calibration corrected early avoids discrepancies in the following months.

2. Keep the connection active

  • The connected services and data sharing must stay turned on in your manufacturer's app.

  • Your manufacturer connectivity subscription must be valid — it is often included for a limited period when the vehicle is bought.

  • Drive regularly. It is driving that triggers the synchronisation of data between your vehicle and Voltaback.

What measurement gap is normal?

In experiments carried out with the audit firm Bureau Veritas, the gap between the measurements of an MID-certified charging station and those of the Voltaback system is on average 1.22%.

This gap can go up as well as down: the variations balance out over the month, for an equivalent monthly total.

Did this answer your question?