Skip to main content

Your meter, your delivery point number and your grid operator by country

How to recognise your meter and your delivery point number, country by country. General information: what Voltaback asks for, if anything, is shown in the app.

Written by Henri Casalis

This article helps you recognise your meter and your delivery point number, the number that identifies your electricity connection (PDL, EAN, CPE, CUPS, POD, MaLo-ID or MPAN depending on the country). It is general information, unrelated to how Voltaback works: what Voltaback asks for, if anything, is shown in the app. If you are not sure what the app expects, write to us in the chat and tell us your country.

What to look for by country

Country

Delivery point number and format

Meter

Grid operator(s)

🇧🇪 Belgium

EAN code, 18 digits, starts with 5414; shown on the bill

Flanders: "digitale meter" (digital meter); Wallonia: "compteur communicant" (communicating meter); Brussels: "compteur intelligent" (smart meter)

Fluvius (Flanders); ORES, RESA and three local operators (AIEG, AIESH, REW) (Wallonia); Sibelga (Brussels)

🇱🇺 Luxembourg

Format not specified in this article; location not specified in this article; write to us in the chat

Smarty (smart meter)

Creos Luxembourg and six other operators (Ville d'Ettelbruck, Ville de Diekirch, Electris, Sudstroum, Sudenergie, Ville de Dudelange)

🇩🇪 Germany

MaLo-ID ("Marktlokations-ID"), 11 digits; location not specified in this article

"Intelligentes Messsystem" (smart metering system); "moderne Messeinrichtung" (basic digital meter)

About 800 "grundzuständige Messstellenbetreiber" (the default metering operators), often the local grid operator

🇨🇭 Switzerland

"Messpunktbezeichnung" (metering point designation), 33 characters, starts with CH; format set by the industry (VSE); location on the bill not specified in this article

Smart Meter ("intelligentes Messsystem" in German, "compteur intelligent" in French)

About 580 local grid operators

🇳🇱 Netherlands

EAN code, 18 digits; can be looked up in Mijn Stedin (Stedin customers) or on eancodeboek.nl; location on the bill not specified in this article

"Slimme meter" (smart meter)

Liander, Enexis, Stedin, Westland Infra, Coteq, Rendo (depending on the region)

🇵🇹 Portugal

CPE ("Código de Ponto de Entrega"), 20 characters, starts with PT; shown on the bill

"Contador inteligente" (smart meter)

Mainland Portugal: E-REDES (99.5% of customers on normal low voltage) and ten small operators

🇪🇸 Spain

CUPS, 20 or 22 characters, starts with ES; shown on the bill

"Contador inteligente" (or "contador digital")

Several regional operators, one per area (for example i-DE)

🇮🇹 Italy

POD ("Punto di Prelievo"), 14 or 15 characters, starts with IT; on page 2 of the bill

"Contatore elettronico" (electronic meter)

e-distribuzione (Enel), the most widespread; several other regional operators

🇬🇧 United Kingdom (Great Britain)

MPAN; on the bill, bottom line of the block marked "S"

Smart meter

Several regional operators ("DNOs", Distribution Network Operators)

🇫🇷 France

PDL (or PRM), 14 digits; shown on your electricity bill

Linky

Enedis; in some towns, a local utility (for example Sicae Oise, UEM)

Good to know

  • Belgium: three regions, with different operators in each. The EAN code is shown on your bill; you can also find it in your supplier's customer area and, with ORES, in myORES.

  • Germany: the MaLo-ID (11 digits) designates the consumption location; the metering point designation (33 characters, starting with DE) still exists for the meter. You can choose a metering operator other than the local grid operator.

  • Netherlands: the basic digital meter does not send readings, a smart meter does. The term "digitale meter" does not mean the same thing in Belgium and the Netherlands.

  • Portugal: only mainland Portugal is covered.

  • United Kingdom: only Great Britain is covered, not Northern Ireland. The meter is fitted by your energy supplier.

Can't find your number? Write to us in the chat.

Did this answer your question?